Completed Projects
Happy Customers
Projects in Progress
New Orders This Week
Why Steel Works in North Carolina
Steel works in North Carolina because each frame is engineered to its county’s loads, and those loads shift across the state: hurricane wind on the coast, snow in the mountains, some of both in the Piedmont. Our steel building kits ship with PE-stamped drawings for that county, so metal buildings in NC with one footprint can get different frames.
Wind enters the design as a basic wind speed from ASCE 7 plus an exposure category for the site, and design speeds run highest along the coast, which has the storm record to match: Hurricane Hazel in 1954, Florence at Wrightsville Beach in 2018.
Snow is the mountain variable: Blue Ridge counties carry real ground snow loads, the Piedmont modest ones, and both are set per site. Summers run hot and humid statewide, so plan insulation and vents with the frame; our guide to insulating a metal building compares the options.
Permits and the farm building exemption are covered in the codes and permits section below.
North Carolina at a Glance
What We Engineer for:
Design wind speed calculated per county under ASCE 7, highest along the coast
Coastal counties design for hurricane wind; a wind rating, not a storm guarantee
Real ground snow loads in the mountain counties, calculated per site
Hot, humid summers; insulation and vents keep a steel shop usable
Check the parcel on North Carolina’s FRIS flood maps before ordering
Building Codes and Permits in North Carolina
One State Building Code applies throughout North Carolina under G.S. 143-138, adopted by the Building Code Council. The edition in force is the 2018 code, effective January 1, 2019, with ASCE 7-10 design loads; a 2024 edition has been adopted, but the General Assembly has postponed its start. Code texts are on the OSFM codes page.
Every city and county in North Carolina has to provide building inspections, so no parcel sits outside code enforcement. The city usually issues permits inside its limits and extraterritorial area, the county on unincorporated land. We don’t pull the permit; we supply the PE-stamped drawings, load calculations and specifications your application needs.
Your drawings state the design wind speed and exposure category for the site, and the frame and anchor bolts are sized to those figures. A local contractor pours the foundation to our anchor bolt layout. Parts of the coast fall in the code’s wind-borne debris region, where glazed openings need impact-resistant glass or an approved protective cover.
Check your parcel on the state’s Flood Risk Information System before ordering; Hurricane Helene’s flooding in September 2024 reached deep into the western mountains. Under G.S. 143-138(b4), nonresidential farm buildings used for a bona fide farm purpose outside any city’s building-rules jurisdiction are exempt from the building code. Floodplain rules are separate, so call your county first.
One State Building Code applies throughout North Carolina under G.S. 143-138, adopted by the Building Code Council. The edition in force is the 2018 code, effective January 1, 2019, with ASCE 7-10 design loads; a 2024 edition has been adopted, but the General Assembly has postponed its start. Code texts are on the OSFM codes page.
Every city and county in North Carolina has to provide building inspections, so no parcel sits outside code enforcement. The city usually issues permits inside its limits and extraterritorial area, the county on unincorporated land. We don’t pull the permit; we supply the PE-stamped drawings, load calculations and specifications your application needs.
Your drawings state the design wind speed and exposure category for the site, and the frame and anchor bolts are sized to those figures. A local contractor pours the foundation to our anchor bolt layout. Parts of the coast fall in the code’s wind-borne debris region, where glazed openings need impact-resistant glass or an approved protective cover.
Check your parcel on the state’s Flood Risk Information System before ordering; Hurricane Helene’s flooding in September 2024 reached deep into the western mountains. Under G.S. 143-138(b4), nonresidential farm buildings used for a bona fide farm purpose outside any city’s building-rules jurisdiction are exempt from the building code. Floodplain rules are separate, so call your county first.
Steel Buildings We Deliver Across North Carolina
What a Steel Building Costs in North Carolina
A steel building’s price in North Carolina comes from its size, the loads your site calls for and the finish level. Location drives the engineering: coastal counties add frame weight for wind, mountain counties for snow, and the Piedmont usually falls between. Your quote is priced for your parcel.
Entry footprints, from 20×20 up to 30×40, cover detached garages and covered RV storage.
Mid-size buildings, from 30×50 up to 40×80, suit equipment barns and two-bay workshops.
Large buildings, from 60×80 up, are where warehouses and distribution buildings start.
The same 40×60 needs more steel on an open Outer Banks lot in Dare County than in the Piedmont, and a Watauga County site near Boone adds snow to the calculation. Always give us your county, and your flood zone if you know it.
A bare kit, the frame with roof and wall panels, sits at the $ tier. Insulation, roll-up doors, walk doors and liner panels move it to $$ or $$$. For dollar ranges by size, see our metal building cost guide.
Entry footprints, from 20×20 up to 30×40, cover detached garages and covered RV storage.
Mid-size buildings, from 30×50 up to 40×80, suit equipment barns and two-bay workshops.
Large buildings, from 60×80 up, are where warehouses and distribution buildings start.
The same 40×60 needs more steel on an open Outer Banks lot in Dare County than in the Piedmont, and a Watauga County site near Boone adds snow to the calculation. Always give us your county, and your flood zone if you know it.
A bare kit, the frame with roof and wall panels, sits at the $ tier. Insulation, roll-up doors, walk doors and liner panels move it to $$ or $$$. For dollar ranges by size, see our metal building cost guide.
Popular Metal Building Sizes in North Carolina
North Carolina Cities We Deliver to
Delivery and installation is statewide. These cities have a dedicated page with local permitting detail.
If your city isn’t listed, we still deliver to it. Call (888) 415-1576 or use the quote form above.
How North Carolina Owners Use Steel Buildings by Region
Mountains and foothills (Asheville, Hickory, Boone; Surry and Wilkes counties)
Mountain properties build for snow and storage. Western North Carolina grows the state’s Fraser fir Christmas trees, and tree farms need dry equipment storage. For campers and motorhomes kept near the Blue Ridge Parkway, see our RV garages.
See also: Recreational steel buildings · Barn with living quarters
Piedmont Triad (Greensboro, Winston-Salem, High Point, Asheboro)
The Triad builds for distribution. I-40 and I-85 run through Greensboro, and Piedmont Triad International Airport has become an aerospace campus: Honda Aircraft Company builds HondaJets beside the runways, and Boom Supersonic finished its Overture Superfactory there in 2024. For self-storage and contractor-yard layouts, see our metal storage unit kits.
See also: Metal office buildings · Metal buildings with lean-to
Charlotte metro (Mecklenburg, Cabarrus, Union, Iredell counties)
Around Charlotte, race shops sit next to suburban garages. Mooresville is known as Race City USA for its NASCAR teams, Concord has Charlotte Motor Speedway and Hendrick Motorsports, and those shops need clear-span floors. On suburban lots in Union and Cabarrus counties, owners add detached garages, and some build metal building homes; start with our residential metal buildings.
See also: Metal sheds · Steel church buildings
Eastern North Carolina (the Triangle and the Coastal Plain)
East of Raleigh, farming and the state’s highest design wind speeds shape what gets built. North Carolina leads the nation in sweet potato and tobacco production, and farms across the Coastal Plain need metal barns for equipment and metal storage buildings for crops and feed. Suburban lots around Raleigh-Durham call for garages and shops. For agricultural layouts, see our metal farm buildings.
See also: Livestock barns · Metal hay barns
What can we design for you today?
Talk to a building specialist to learn more!
Design Your Building NowFrequently Asked Questions
Yes. Every North Carolina building we engineer follows the State Building Code, which applies throughout the state, and the drawings follow the edition your inspections department enforces. What changes from county to county is the site data on those drawings: design wind speed, exposure category and ground snow load.
Yes, when the frame is engineered for its coastal site, though no building is guaranteed through a direct hurricane strike. We size the frame, bracing and anchors to your county’s design wind speed and exposure category, and the drawings show the figures your inspector checks. Our article on whether a barndominium can withstand a hurricane goes deeper.
Usually yes: the city issues the permit inside its limits and extraterritorial area, the county on unincorporated land. The main exception is a nonresidential farm building outside any city’s building-rules jurisdiction, which state law exempts from the building code, though floodplain rules still apply. Call your inspections office before you order.
Yes, we deliver across North Carolina, from Watauga and Avery counties in the mountains to the Outer Banks. Mountain sites need a truck route up to the pad; for island addresses, we confirm logistics when your order is finalized. We are based in Fort Lauderdale, Florida, and have been in business since 2005. Your crew or a local erector assembles the building; if you want installation arranged, ask when you request your quote.
Lead time for a steel building in North Carolina depends on the configuration, the season and the site. We confirm your production schedule and delivery window when your order is finalized. We don’t quote generic timelines: a pad on a mountain road in January and a Piedmont lot in May are different deliveries.
Barndominium Interior Ideas for a Steel-Frame Home
Quick Answer Barndominium interior ideas that hold up start with what the steel frame allows: an open floor with no load-bearing interior walls, and enough height for a loft or a vaulted great room. Behind the finishes, insulation and moisture control keep the rooms dry, and a separation wall divides living space from any shop. […]
Read Article
Standard Garage Sizes: 1-, 2- and 3-Car Garage Dimensions
Quick Answer Standard Garage Sizes at a Glance When people say “standard garage size,” they usually mean a two-car garage, and that is what most new houses get. In 2025, 64% of newly completed single-family homes had a two-car garage, according to the Census Bureau’s Characteristics of New Housing data. Garages for three or more […]
Read Article
What is a PEMB (Pre-Engineered Metal Building)?
Quick Answer What PEMB Stands for, and What the Industry Actually Calls it PEMB stands for pre-engineered metal building. Contractors and building officials use the acronym for a low-rise steel building that one manufacturer designs and supplies as a complete structural package. The same product appears in quotes under other names too: pre-engineered steel building, […]
Read Article
Red Iron Steel Buildings Explained
Quick Answer What Red Iron is and Where the Name Comes From Dealers and classified ads use “red iron” as if it were a material you could order by name. It isn’t. It’s trade shorthand for the heavy structural steel in the primary frame of a metal building, and the phrase stuck because the parts […]
Read Article
How Much Does it Cost to Build a Barndominium in 2026?
How much does it cost to build a barndominium? Nationally in 2026, a fully turnkey build with standard finishes runs $65 to $160 per square foot, and the steel or post-frame shell alone, the kit plus on-site assembly, runs $30 to $50 per square foot before any interior work starts (Source: HomeGuide, 2026). For a […]
Read Article
How Long Do Metal Roofs Last?
Quick Answer Types of Metal Roofing Panels and Why the Fastening System Matters Panel profile decides how a roof looks. Fastening system decides how long it holds up, and that second factor does more to separate the low end of the 30-to-50-plus-year range from the high end than the choice of steel itself. Three fastening […]
Read Article
How to Convert a Garage into Living Space: A 2026 Cost and Code Guide
Converting a garage into living space is the process of insulating, sealing, finishing, and reclassifying a garage so it can be permitted and used as a bedroom, home office, family room, or accessory dwelling unit (ADU). The work costs $15,000 to $60,000 in most US regions in 2026, depending on scope, takes 3 to 10 […]
Read Article
Pole Barn Houses: Costs, Plans, and What They Actually Are in 2026
A pole barn house is a residential home built on a post-frame structure: pressure-treated wood columns set into the ground or onto concrete piers, with a wood truss roof and metal sheeting for the walls and roof. It is closely related to the barndominium but distinct in one important way. A barndominium uses steel framing […]
Read Article
How to Build a Horse Arena: The Owner’s Practical Guide for 2026
The short version of building a horse arena: pick the site carefully, pull the permits, hand off the technical work to people who do it for a living, write a lot of checks, and wait eight to sixteen weeks for an indoor build (three to six for outdoor) before the first horse walks on the […]
Read Article