Orlando Steel Buildings

Metal Buildings in Orlando, Florida

Price Your Orlando Building Now!

Let’s start with your building size

(this field is required)
(this field is required)
(this field is required)
(this field is required)
(this field is required)
(this field is required)
(this field is required)
(this field is required)

*By clicking “Get My Free Quote”, you agree to our Privacy Policy and Terms & Conditions and consent to receive calls and SMS messages from US Patriot Steel about your quote request and related follow-up. Message/data rates may apply. Message frequency varies. Reply STOP to opt out or HELP for help. Consent is not a condition of purchase.

0

Completed Projects

0

Happy Customers

0

Projects in Progress

0

New Orders This Week

0

Completed Projects

0

Happy Customers

0

Projects in Progress

0

New Orders This Week

Why Orlando Builders Choose Steel

Metal buildings in Orlando are mostly suburban projects: a detached garage, a tall bay for the motorhome or camper, a workshop behind the house. If your subdivision has a homeowners association, its approval may be needed, so the plan starts with what the lot and the HOA allow. Our guide to prefab metal buildings for backyards covers layout and placement. Small businesses order inventory and shop buildings for equipment, stock and service vans.

If you are looking for a custom metal building company that serves Orlando, we are a dealer of pre-engineered steel building kits, and every quote is a custom configuration. American-made steel, drawings stamped by a licensed professional engineer and delivery to your site come from us. We have no branch office or yard in Orlando. Your crew or a local erector handles installation; if you want installation arranged, say so in your quote request.

Orlando is the Orange County seat, but most county residents live outside any city, and the city limits zigzag around pockets of county land. Who reviews your permit depends on that line. Your drawings carry the design wind speed for your parcel under the Florida Building Code. Statewide rules are covered in our Florida codes and permits section.

Orlando, FL at a Glance

County: Orange County

1
City and County

Orange County seat; 62% of county residents live outside the 13 cities and towns

2
What Gets Built

Garages, RV garages, workshops, inventory buildings

3
Wind

The city’s permitting guide lists 130 mph as the typical design wind speed; your drawings carry the value for your parcel

4
Flood Zones

Lakes and low ground: a floodplain lot gets extra review and a set floor height

5
Permits

City of Orlando Permitting Services inside city limits; Orange County Division of Building Safety in unincorporated areas

Planning a custom steel building? We’ll design a solution that fits your project, space, and specific needs.

Our building experts are ready — request your free quote today!
Get a Free Custom Quote
US Patriot Steel

Orlando Building Permits and Local Codes

Who issues the permit

Inside city limits, the City of Orlando Permitting Services office issues the building permit, and plans go through its online review. In unincorporated areas, the Orange County Division of Building Safety does, through the county’s Fast Track portal. Edgewood residents get city approval before they apply to the county.

What we supply

Your quote package includes PE-stamped structural drawings with the design wind speed for your parcel, load calculations, specifications and an anchor bolt layout. County permits also need plans sealed by a Florida licensed engineer or architect and a Product Approval Specification Sheet; ask us about both at order. The site plan, a lot grading plan for county parcels and the city’s impervious surface worksheet are for you or your contractor.

Special local factors

Inside the city, a homeowners association may need to sign off before the permit, and historic districts add a review. In the county, a shed of 120 square feet or less needs only a zoning permit. Parcels in the Ranger Drainage District, east of the city, can need a district permit as well. Check your parcel on the FEMA Flood Map Service Center first.

Who issues the permit

Inside city limits, the City of Orlando Permitting Services office issues the building permit, and plans go through its online review. In unincorporated areas, the Orange County Division of Building Safety does, through the county’s Fast Track portal. Edgewood residents get city approval before they apply to the county.

What we supply

Your quote package includes PE-stamped structural drawings with the design wind speed for your parcel, load calculations, specifications and an anchor bolt layout. County permits also need plans sealed by a Florida licensed engineer or architect and a Product Approval Specification Sheet; ask us about both at order. The site plan, a lot grading plan for county parcels and the city’s impervious surface worksheet are for you or your contractor.

Special local factors

Inside the city, a homeowners association may need to sign off before the permit, and historic districts add a review. In the county, a shed of 120 square feet or less needs only a zoning permit. Parcels in the Ranger Drainage District, east of the city, can need a district permit as well. Check your parcel on the FEMA Flood Map Service Center first.

Looking for expert advice on your custom steel building? Our team will help you plan every detail with clarity and confidence!

Call our steel building professionals for free, no-obligation guidance.
Call Now: (888) 415-1576
US Patriot Steel

What a Steel Building Costs in Orlando

Every Orlando quote is priced on size, finish and parcel loads. Here the price moves most with the eave height, the size and number of roll-up doors and how the lot sits relative to the nearest lake or low ground. For dollar ranges by garage type, see our garage cost guide.

Size

A garage for the extra car usually runs 24×30 to 24×35, and our list of standard garage sizes helps you check the door and bay widths. An RV garage needs a tall door and more length than a car bay, so measure the motorhome or camper with its ladder and roof units first. A workshop usually runs 30×50, and an inventory building for a small business 40×60.

Local loads

Your PE drawings carry the design wind speed for your parcel; the city’s permitting guide lists 130 mph as typical. In unincorporated Orange County, a lot in the 100-year floodplain needs its lowest floor at least one foot above the flood elevation, which can raise the slab.

Foundation

Garages and shops usually sit on a concrete slab, sized by your local foundation contractor to match our anchor bolt layout. Florida’s limestone can form sinkholes, and a geotechnical engineer can run soil borings on your lot if that worries you. Our steel building foundations guide covers slab options.

Size

A garage for the extra car usually runs 24×30 to 24×35, and our list of standard garage sizes helps you check the door and bay widths. An RV garage needs a tall door and more length than a car bay, so measure the motorhome or camper with its ladder and roof units first. A workshop usually runs 30×50, and an inventory building for a small business 40×60.

Local loads

Your PE drawings carry the design wind speed for your parcel; the city’s permitting guide lists 130 mph as typical. In unincorporated Orange County, a lot in the 100-year floodplain needs its lowest floor at least one foot above the flood elevation, which can raise the slab.

Foundation

Garages and shops usually sit on a concrete slab, sized by your local foundation contractor to match our anchor bolt layout. Florida’s limestone can form sinkholes, and a geotechnical engineer can run soil borings on your lot if that worries you. Our steel building foundations guide covers slab options.

Design Your Building Now

Serving Orlando and Surrounding Orange County

We deliver across Orange County: Orlando, Winter Park, Apopka, Ocoee, Winter Garden, Maitland, Windermere and the unincorporated communities from Pine Hills to Wedgefield. Neighboring Seminole, Volusia, Brevard, Osceola, Polk and Lake counties are on the route as well.

We don’t have a branch office in Orlando. All orders are handled from our main office in Fort Lauderdale, FL, and one representative stays with your project from the first call through delivery.

Orange County is still farm country in places: its nursery, greenhouse and sod sales rank second among Florida counties in the USDA 2022 Census of Agriculture, and half of its farms are under 10 acres. Growers often pair a shop with steel greenhouses. In the rural east, around Wedgefield and Christmas, mention a long or sandy drive when you call with the parcel address.

Orange County Delivery Area

Primary delivery zone: Orange County, FL

Also serving: Seminole County · Volusia County · Brevard County · Osceola County · Polk County · Lake County

Main office: Fort Lauderdale, FL · (888) 415-1576

From Quote to Installed Building

Get a Free Quote

Send the width, length and height, the ZIP code of your Orange County parcel and what the building is for, say a two-car garage or an RV garage for a 35-foot motorhome. We calculate the wind loads for that site, lay out the anchor bolts and return a line-item quote with the PE drawing package.

Engineering and Permitting

You or your contractor file the PE-stamped drawings with City of Orlando Permitting Services inside city limits, or with the Orange County Division of Building Safety in unincorporated areas. Get the HOA letter and any floodplain permit lined up early. Plan reviewer questions on the engineering come straight to us.

Delivery and Installation

Lead time and the delivery schedule are confirmed at order. The kit arrives pre-cut and pre-drilled, ready for your crew or a local erector. Truck access to the parcel is confirmed before the kit ships.

Get a Free Quote

Send the width, length and height, the ZIP code of your Orange County parcel and what the building is for, say a two-car garage or an RV garage for a 35-foot motorhome. We calculate the wind loads for that site, lay out the anchor bolts and return a line-item quote with the PE drawing package.

Engineering and Permitting

You or your contractor file the PE-stamped drawings with City of Orlando Permitting Services inside city limits, or with the Orange County Division of Building Safety in unincorporated areas. Get the HOA letter and any floodplain permit lined up early. Plan reviewer questions on the engineering come straight to us.

Delivery and Installation

Lead time and the delivery schedule are confirmed at order. The kit arrives pre-cut and pre-drilled, ready for your crew or a local erector. Truck access to the parcel is confirmed before the kit ships.

40×60 Inventory Building

We needed a place to sort rental equipment between events. The building allows separate spaces for returned items and orders ready to go. That separation has been more useful than simply having extra square footage to fill with shelves.

Thomas K.  Orlando, Florida

24×35 Garage

We wanted to reclaim the driveway without building something oversized. This garage fits the extra car with storage along one side. I chose a simple arrangement so we could still open the doors comfortably and walk all the way around.

Lisa V.  Orlando, Florida

30×50 Workshop

My father and I have been rebuilding an old pickup. Having a dedicated shop means the parts can stay organized between weekends. We set aside a clean table for smaller components instead of spreading them across whatever surface was available.

Frank O.  Orlando, Florida

Orlando Steel Building Questions

Yes. We deliver to Orlando and across Orange County, including Winter Park, Apopka, Ocoee, Winter Garden and the unincorporated communities, and to neighboring Seminole, Volusia, Brevard, Osceola, Polk and Lake counties. Call with your parcel address.

Inside city limits, City of Orlando Permitting Services does; in unincorporated areas, the Orange County Division of Building Safety does. Because the city line zigzags, check your parcel with the city’s zoning lookup first. We supply the engineering package; you or your contractor file it.

Installation is done by your own crew or a local erector you hire; the kit, the PE-stamped drawings, the anchor bolt layout and delivery come from us. If you would rather have installation arranged, say so when you request your quote.

Yes, though the paperwork is lighter. In unincorporated Orange County, a shed with a footprint of 120 square feet or less gets a zoning permit without engineered plans. Inside Orlando, a prefabricated shed needs a building permit and the maker’s drawings. Our metal sheds ship with PE-stamped drawings at any size.

Often yes, if the building meets the floodplain rules. In unincorporated Orange County, a lot in the 100-year floodplain needs a floodplain permit, a surveyor’s Elevation Certificate and a lowest floor at least one foot above the flood elevation. Inside Orlando, floodplain lots get added review.